ceramic coating blade:
Descriptions:
1. National Patent NO: 2006100402289
2. A longer running time and fewer costly blade changes
3. A smooth coating surface of your paper and board
4. Constant coating quality
5. Reduced paper breaks
6. Shorter run-in times
7. Fewer blades to buy and store
8. Wedge angle: 0 degree, 6 degree, 25 degree, 15 degree, 30 degree
9. Width: 50mm-100mm(76.2mm, 86mm, 92mm, 95mm and so on); Thickness: Thicker than 0.381mm(0.381mm, 0.5mm, 0.6mm and so on)

Advantages:
1. New Technology of which the cost performance is much higher than the ordinary steel blades.
2. Can be applied on the high-speed printing machine(more than 180m/min).
3. The high wear-resistance: The hardness up to 900HV ~ 1300HV. 8 to 10 times than the original blade.
4. High corrosion resistance: 10% sulfuric acid concentration of 25 degrees, the corrosion rate is 0.0206mm per year, and in the same conditions corrosion rate is 2 to 18 times than the Cr18N19 stainless steel.
5.. Sliding performance is good: There is a good rub wear performance.
6. Low porosity: When the surface coating up to 15um, there will be pore
7. Longest length of 200 meters, thickest thickness of 0. 381mm widest width of 20 to 150mm .